Control systems Safety valves
4
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2024
TI-S13-27 CTLS Issue 17
SV60 Safety Valve
Description The SV60 is a range of full lift flanged safety valves suitable for use on steam, inert industrial gas and water services. Please contact Spirax Sarco for suitability of any other media.
Available types Model and material
Bonnet and cap configuration
Open type easing lever Sealed cap Packed easing lever - DN20 to DN100 only Open type easing lever
Closed bonnet
SV604 SV607
Carbon steel SG iron
4.7 39
Open bonnet
Applications The SV60 is suitable for the protection of steam boilers, pipelines, pressure vessels, compressors and receivers and most general process industry applications. Certification A manufacturers' Typical Test Report is provided as standard for each valve which will include valve set and hydraulic test pressure. Also available on request is material certification in accordance with EN 10204 3.1. mark and complies with the requirements of the European Pressure Equipment Directive 2014/68/EU falling within Category 4 for Group 2 gases. Seat tightness to ASME/API Standard 527-1992. Lloyds Register (LR) type approval - Certificate number 01/00125 (E2). The SV604 (PN flanged) is approved by the TÜV to AD-Merkblatt A2, AD-Merkblatt A4, TRD 421, Vd TÜV 100, 100/4. Standards and approvals The SV60 carries the
Sizes and end connections Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150.
Valve type
Inlet connection
Outlet connection
PN16 (DN65 to DN150 only) PN16 PN25 PN16
Standard PN flanges are to EN 1092 and ASME 300 flanges to EN 1759-1.
SV607
PN40
PN16
SV604
ASME 300
ASME 150
TI-S13-27 CMGT Issue 17
Page 1 of 13
SV60 Safety Valve
Powered by FlippingBook