Control systems Safety valves
4
Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions supplied with the product. Installation note: The safety valve should always be fitted with the centre line of the housing vertically above the line.
SVL488 safety valve selection guide Model type SVL488
SVL488
A = Closed bonnet/pneumatic Lever
Configuration
B
B = Closed bonnet/sealed cap C = Closed bonnet/packed easing lever
E = EPDM (FDA) 'O' Ring and bellows
Seal material
E
V = FKM 'O' ring and bellows
PN16 = Flanged PN16
N = ANSI #150 RF ASME Flanged T = ISO2852/ISO2037 Clamp Ends S = ASME BPE Clamp Ends D = DIN32676/DIN11850 Clamp Ends
Inlet connection
PN16
4.7 123
SVL488
-
B
-
E
-
PN16
How to order Example: 1 off Spirax Sarco DN50 SVL488-B-E-PN16 safety valve with a set pressure of 10 bar g. (If the bellows is not required, please add 'without bellows').
TI-P315-03 CTLS Issue 12
Page 9 of 9
SVL488 Stainless Steel Sanitary Safety Valve
Powered by FlippingBook