Compressed air products Filters
5
Principle of operation Monnier air line filters are built to ensure solid and liquid contaminants are removed from compressed air. All Monnier filters are engineered with the exclusive Whirl-Away design which creates high centrifugal force with low pressure drop. The whirling action forces all liquids and solids against the bowl wall causing them to run down below the quiet-zone baffle where they can be drained out. The air then flows through the element where the smaller particles are removed and the filtered air passes downstream. The leak proof drain valve has an o-ring seal that can be opened and closed without tools.
5.1 3
Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-P504-02) supplied with the product. Warning:
9.1.4
Polycarbonate bowls are attacked by phosphate ester fluids, solvents, paint thinners and carbon tetrachloride. These and similar substances should never be allowed to come into contact with the bowl. Certain compressor lubricating oils also contain additives harmful to polycarbonate and, where there is any doubt we recommend, in the interests of safety, that a bowl guard should be fitted. Installation note: Fit into a horizontal pipeline with the air flow in the direction of the arrow and the bowl vertically downwards, as close as possible to the equipment it is protecting.
How to order Example : 1 off MF2M Monnier miniature compressed air filter having ¼" screwed BSP connections. Note : If any optional extras are required they must be clearly specified when placing an order.
TI-P504-01 CH Issue 2
Page 3 of 4
MF2M Monnier Miniature Compressed Air Filter
Powered by FlippingBook