Compressed air products Regulators
5
Optional extras
Pressure gauges Available in two sizes, with 4 pressure ranges. The face is marked in both bar and psi. Please state, size and pressure range when placing an order.
Tamper-proof cap An aluminium tamper-proof cap can be fitted to prevent unauthorised pressure adjustment Dimensions (approximate) in mm
0 to 2 bar
0 to 30 psi
53
0 to 7 bar
0 to 100 psi
Pressure ranges
0 to 11 bar
0 to 160 psi
54
0 to 21 bar
0 to 300 psi (50 mm size only)
Dimensions (approximate) in millimetres
Type 21 mounting bracket A zinc plated mild steel bracket can be attached to the regulator, using the plastic mounting ring supplied with the regulator. Please note: An aluminium mounting ring can be supplied, at extra cost, and must be specified at the time of order placement. Dimensions (approximate) in millimetres
C
A
B
D
Mounting ring
Size A B C
Size A B C
C
40mm 40 47 R "
50mm 49 45 R "
E
5.2 6
B
Pressure gauges for panel mounting With chromium plated bezel available in two ranges, the face being marked in bar and psi as follows:-
A
A
B
C
D
E
0 to 2 bar
0 to 30 psi
Pressure ranges
44
19
32
12
6
0 to 7 bar
0 to 100 psi
If the regulator is to be panel mounted a hole is required in the panel 48 mm diameter, and the panel thickness must not exceed 8 mm.
Dimensions (approximate) in millimetres
B
D
A
C
A
B
C
D
53
56
48
R
TI-P504-19 CH Issue 2
Page 2 of 5
IR1M and IRN1M Monnier International Compressed Air Regulators
Powered by FlippingBook