Compressed air products Filter/regulators
5
Optional extras
Airsets The MP2M, MPN2M regulators are also available as airsets consisting of Type 8 bracket, mounting ring and pressure gauge (see options below).
Pressure gauges for panel mounting With chromium plated bezel available in two ranges, the face being marked in bar and psi as follows:-
0 to 2 bar
0 to 30 psi
Pressure ranges
0 to 7 bar
0 to 100 psi
Type 8 mounting bracket and mounting ring The filter / regulator can be mounted using a zinc plated mild steel bracket and aluminium mounting ring (not shown). Both items must be specified when placing an order. Dimensions (approximate) in millimetres
Dimensions (approximate) in millimetres
B
D
A
C
12.7 12.7
38
5
10
Clamping yoke
29
31
A
B
C
D
53
56
48
R
51
64
Pressure gauge Available in two sizes, with 4 pressure ranges. The face is marked in both bar and psi. Please state, size and pressure range when placing an order.
Bowl guard In the interest of safety Spirax Sarco recommend that a bowl gaurd should be fitted. See the 'Warning' under 'Safety information, installation and maintenance'.
5.4 2
0 to 2 bar
0 to 30 psi
0 to 7 bar
0 to 100 psi
Pressure ranges
0 to 11 bar
0 to 160 psi
0 to 21 bar
0 to 300 psi (2" size only)
Dimensions (approximate) in millimetres
R "
1½" version 40 mm 2" version 48 mm
1½" version 47 mm 2" version 45 mm
TI-P504-05 CH Issue 2
Page 2 of 6
MP2M and MPN2M Monnier Miniature Compressed Air Filter/Regulators
Powered by FlippingBook