Compressed air products Filter/regulators
5
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P504-07 CTLS Issue 5
MPC1M, MPC2M and MPC2AM High Efficiency Compressed Air Filter/Regulators Description The MPC range of (self-relieving) high efficiency oil removing filter/regulators provide very high quality compressed air, with accurate pressure control, for pneumatic actuators and general purpose systems. Principal features - Compact miniature oil removing filter/regulator. - Self-relieving. - High efficiency - Exceeding 99.95% against D.O.P. tests. - Efficiency testing carried out in accordance with ISO 12500 at 51 mg/m 3 (40 ppm) inlet concentration. - Oil carryover less than 0.0255 mg/m3 (0.02 ppm). - 100% water removal at line temperature. - Polycarbonate bowl. - External black anodised finish. - Particle effiency: 99.96% - Inlet dry pressure drop: 1.5 psi d. MPC2M shown with optional pressure gauge.
5.4 7
Available types supplied as standard MPC1M
Metal bowl with manual drain and tamper-proof cap.
MPC2M
Polycarbonate bowl with manual drain.
MPC2AM Metal bowl with autodrain.
9.4.6
Applications The MPC_M is used to provide very high quality compressed air. There are many applications where compressed air of a particularly high quality is required. Typical examples include air bearings on machine tools, air gauging equipment, instrument air supplies, fluidic systems, breathing air, pneumatic positioners, etc.
Caution ONLY the MPC1M is suitable for hazardous area environments. This device is classified as out of scope because it has been assessed as being unable to generate a temperature increase or source of ignition during operation. Important In hazardous environments, a standard pressure gauge MUST NOT be used. Please use the pressure gauges supplied with the Spirax Sarco positioner as a reference for the correct setting of inlet pressure to the positioner. The MPC2M and MPC2AM MUST NOT be used in hazardous environments.
TI-P504-07 CTLS Issue 5
Page 1 of 6
MPC1M, MPC2M and MPC2AM High Efficiency Compressed Air Filter/Regulators
Powered by FlippingBook