Compressed air products Filter/regulators
5
Optional extras
Airsets The MPC2M, MP2AM filter/regulators are also available as airsets, consisting of Type 8 or FK21 bracket, mounting ring and pressure gauge (see the 'MPC optional extras' table below). MPC optional extras - Selection table
Feature
MPC1M
MPC2M
MPC2AM
Without drain
OE
Polycarbonate bowl
With manual drain
S
Bowl guard
OE
With manual drain
OE
OE
Metal bowl (no sight glass)
With autodrain
S
Tamper-proof cap
With locking seal
OE
OE
OE
50 mm Ø
OE
OE
Pressure gauge
40 mm Ø
OE
OE
OE
Type 8 mounting bracket
OE
OE
FK21 fixing kit
OE
OE
OE
Aluminium locking ring
OE
OE
OE
Suitable for hazardous environments
Yes 1
No
No
5.4 9
1. Important Note In hazardous environments, a standard pressure gauge MUST NOT be used. Please use the pressure gauges supplied with the Spirax Sarco positioner as a reference for the correct setting of inlet pressure to the positioner.
S = Supplied as standard OE = optional extra = not available
Note: A tamper-proof cap with locking seal is recommended as an optional extra for MPC2M and MPC2AM airsets.
Tamper-proof cap (Standard on MPC1M) Dimensions (approximate) in millimetres
FK21 fixing kit The FK21 fixing kit is required to mount the MPC_M onto the Spirax Sarco range of PN pneumatic actuators. The aluminium mounting ring must also be specified. Dimensions (approximate) in millimetres
Ø37
9.4.8
30.5
Ø8.2
40
51
32
61.5
Optional extras continued on next page
TI-P504-07 CTLS Issue 5
Page 3 of 6
MPC1M, MPC2M and MPC2AM High Efficiency Compressed Air Filter/Regulators
Powered by FlippingBook