Compressed air products Filter/regulators
5
Performance selection (with primary pressure 10 bar) For any specified primary filtration pressure, there is a maximum recommended air flowrate. Keeping within this, will ensure that the element performance maintains the stated high efficiency levels, particularly for the removal of oli and water contaminants.
Maximum secondary flow at peak performance
Air flow scfm
Air flow dm 3 /s
5.4 11
Use of the product in this region may reduce the oil removing efficiency.
Droop characteristics
Air flow scfm
9.4.10
Air flow dm 3 /s
Graph utilises some typical values for secondary flow/pressure to demonstrate droop
Pressure droop
Droop =
@ Relevant flowrate
Set point
TI-P504-07 CTLS Issue 5
Page 5 of 6
MPC1M, MPC2M and MPC2AM High Efficiency Compressed Air Filter/Regulators
Powered by FlippingBook