Compressed air products Isolation valves, drain traps and ancillaries
5
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2022
TI-P610-03 CMGT Issue 6
BRair Compressed Air Drain Trap
Description The BRair is a thermodynamic type compressed air drain trap, specifically for use on railway rolling stock (British Rail Cat. no. 61/41955). The external body surfaces have electroless nickel preparation (ENP) which is oxidation resistant. Note : The BRair is not suitable for use on PED group 1 liquids or gases. Standards This product fully complies with the requirements of the EU Pressure Equipment Directive/UK Pressure Equipment (Safety) Regulations. Certification This product is available with a manufacturer’s Typical Test Report for the body and cap as standard and EN 10204 3.1 if specified at the time of order placement. Note : All certification / inspection requirements must be stated at the time of order placement.
Sizes and pipe connections ½" screwed NPT, BSP and ISO 228-1.
5.5 11
Material No. Part
Material
1 2 3
Body
Stainless steel
ASTM A743 Gr. CA40F
3 2
Cap
Stainless steel
AISI 416
Disc
Stainless steel
BS 1449 420 S45
Strainer screen
1
4
Stainless steel
BS 1449 304 S16
5
Strainer cap Stainless steel
AISI 416
9.5.10
Strainer cap gasket
6
Stainless steel
BS 1449 304 S16
4
6
5
TI-P610-03 CMGT Issue 6
Page 1 of 3
BRair Compressed Air Drain Trap
Powered by FlippingBook