Compressed air products Isolation valves, drain traps and ancillaries
5
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P148-35 CMGT Issue 5
CA14S Air and Gas Trap DN40 and DN50 (Flanged)
Description The CA14S is a cast iron ball float air and gas trap. It is available with a metal valve cone given designation CA14S having horizontal flanged connections. The cover will be drilled and tapped ½ " BSP T Rp (ISO 7-1) or NPT for the purpose of fitting a balance line. Operating Media The CA14 is designed for use on air or gases within PED group 2. Note: The CA14 is not suitable for use on PED group 1 liquids or gases. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is available with certification to EN 10204 2.2. Note: All certification/inspection requirements must be stated at the time of order placement. Sizes and pipe connections CA14S DN40 and DN50 Standard flanges are BS 4504 PN16. On request ANSI B 16.1/BS 1560 class 125 and JIS/KS 10 flanges with drilled and tapped bolt holes can be provided. PN flanges will be provided with BSP T Rp (ISO 7-1) balance line and ANSI, JIS/KS with NPT balance line.
5.5 31
9.5.26
TI-P148-35 CMGT Issue 5
Page 1 of 6
CA14S Air and Gas Trap DN40 and DN50 (Flanged)
Powered by FlippingBook