Compressed air products Isolation valves, drain traps and ancillaries
5
Pressure/temperature limits
A
B C A
220 200 150 100 50 0 0 2 4 6 8 10121416 C A B
Pressure bar g
The product must not be used in this region.
A-A-A Flanged BS 4504 PN16. A-B-B Flanged ANSI B 16.1/BS 1560 class 125 having flat faces. A-C-C Flanged JIS/KS 10.
Body design conditions
PN16
PMA Maximum allowable pressure
16 bar g
TMA Maximum allowable temperature
220 °C
Minimum operating temperature
0 °C
Product is safe for use under full vacuum conditions Designed for a maximum cold hydraulic test pressure of
24 bar g
5.5 33
Where the trap is to handle a liquid having a specific gravity of less than 1, the following maximum differential pressures will apply.
Specific gravity
Trap
1.0
0.9 0.6 Maximum differential pressure bar 0.8 0.7
CA14S-4.5 CA14S-10 CA14S-14
4.5
4.5
4.5
3.4
2.0
10.0
9.5
6.8
5.5
3.4
14.0 14.0 11.0
8.0
5.0
9.5.28
TI-P148-35 CMGT Issue 5
Page 3 of 6
CA14S Air and Gas Trap DN40 and DN50 (Flanged)
Powered by FlippingBook