Compressed air products Isolation valves, drain traps and ancillaries
5
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2023
TI-P148-23 CMGT Issue 6
CA44S Carbon Steel Air and Gas Trap 1" Screwed
Description The CA44S is a carbon steel ball float air and gas trap with a stainless steel valve cone and has horizontal screwed or socket weld connections. The cover will be drilled and tapped ½ " BSP or NPT (socket weld also available) for the purpose of fitting a balance line. Body and cover castings are produced by a TÜV approved foundry. Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED) and carries the mark when so required. Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement. Sizes and pipe connection 1" Screwed BSP or NPT with BSP or NPT balance line. 1" Socket weld BS 3799 class 3000 with NPT or Socket weld balance line.
2 1
316 8 + 9
4
5.5 43
15 14 17 65 7
Materials No.Part
Material
1 Body
Carbon steel
1.0619+N/WCB
Cover studs
Steel
DN 17240 21 Cr Mo V57
2
Cover nuts
Steel
EN 10269 25 Cr Mo 4
9.5.38
3 Cover gasket
Reinforced exfoliated graphite
4 Cover
Carbon steel
1.0619+N/WCB
5 Valve seat
Stainless steel
BS 970 431 S29
6 Valve seat gasket
Stainless steel
BS 1449 304 S11
7 Pivot frame assembly set screws
Stainless steel
BS 4183 18/8
8 Ball float and lever
Stainless steel
BS 1449 304 S16
9 Valve cone CA44S*
Stainless steel
14 Support frame
Stainless steel
BS 1449 304 S16
15 Pivot frame
Stainless steel
BS 1449 304 S16
16 Pivot
Stainless steel
17 Erosion deflector
Stainless steel
BS 970 431 S29
* Note: The valve cone in the CA44S is permanently attached to the ball float and lever.
TI-P148-23 CMGT Issue 6
Page 1 of 4
CA44S Carbon Steel Air and Gas Trap 1" Screwed
Powered by FlippingBook