Product Handbook 2026 - Volume 1

Compressed air products Isolation valves, drain traps and ancillaries

5

Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-P148-37) supplied with the product. Installation note: The trap should be fitted in the horizontal plane below what it is draining with the direction of flow as indicated on the body so that the float mechanism is free to rise and fall in a vertical plane. Advice on welding of socket weld variants is provided with the installation and maintenance instructions. One of the advantages of the float trap for draining air and gas systems is that no bleed is required for satisfactory operation. However, because the trap has no bleed a separate balance line is needed to prevent it becoming air or gas locked. Make sure that the balance line is piped back to the upstream side. A balance line is essential for the correct operation of this product. For convenience of maintenance it is recommended that a union is fitted in the balance line near to the trap cover.

How to order Example: 1 off Spirax Sarco 1" socket weld CA44S-32 air and gas trap with carbon steel body and cover.

Spare parts The spare parts available are shown in solid outline. Parts drawn in a grey line are not supplied as spares. Available spares * Main valve assembly with float

5, 6, 7, 8 + 9, 14, 15, 16

3, 6

Complete set of gaskets (packet of 3 sets)

* Note: The erosion deflector is pressed into the body during manufacture and not available as a spare. How to order spares Always order spares by using the description given in the column headed 'Available spares' and state the size and type of trap. Example: 1 - Main valve assembly for a Spirax Sarco DN25 CA44S-32 air and gas trap.

5.5 46

Recommended tightening torques

or mm

Item

N m

3

2

Dowel

2 5 7

17

M10 x 60

19 - 21

17

M12

50 - 55

Cheesehead M5 x 20

2.5 - 2.8

9.5.41

7 14 15 5 16 6 8 + 9 Main valve assembly with float

TI-P148-23 CMGT Issue 6

Page 4 of 4

CA44S Carbon Steel Air and Gas Trap 1" Screwed

Powered by