Compressed air products Isolation valves, drain traps and ancillaries
5
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P148-38 CMGT Issue 6
CAS14 and CAS14S Austenitic Stainless Steel Ball Float Air and Gas Traps
Description The CAS14 and CAS14S are austenitic stainless steel ball float gas/air drain traps. They provide efficient condensate drainage from compressed air and other gas systems, allowing the process to operate to its optimum potential. The connections are in the vertical plane for flow downwards. Body and cover castings are produced by a TÜV approved supplier in accordance with AD-Merkblatt WO/TRD100. Operating media The CAS14 and CAS14S are designed for use on air or gases within PED group 2. Note : The CAS14 and CAS14S are not suitable for use on PED group 1 liquids or gases. Available types CAS14 fitted with a viton valve cone ½ " and ¾ " CAS14S fitted with a stainless steel valve cone ½ ", ¾ " and 1"
5.5 53
Optional extra An integral screen. Standards
These products fully comply with the requirements of the European Pressure Equipment Directive 2014/68/EU and carry the mark when so required. Certification This product is available with certification to EN 10204 3.1.B. Note: All certification/inspection requirements must be stated at the time of order placement.
9.5.48
Sizes and pipe connections ½", ¾" and 1"
Screwed BSP T Rp (ISO 7-1) (BS 21 and DIN 2999) or NPT (ANSI B 1.20.1).
½", ¾" and 1"
Socket weld ends to ANSI B 16.11, BS 3799 Class 3000 and DIN 3239.
TI-P148-38 CMGT Issue 6
Page 1 of 5
CAS14 and CAS14S Austenitic Stainless Steel Ball Float Air and Gas Traps
Powered by FlippingBook