Compressed air products Isolation valves, drain traps and ancillaries
5
Materials
2
1
16
4
5.5 68
6
5
7
3
8
No.Part 1 Body
Material
Austenitic stainless steel (316)
1.4408/CF8M
Cover studs
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A2.70 A2.70
2
Cover nuts
3 Cover gasket
BS 1449 304 S16
4 Cover
Austenitic stainless steel (316)
1.4408/CF8M
5 Valve seat
Stainless steel
BS 970 431 S29
6 Mounting plate gasket
Stainless steel
BS 1449 304 S11
7 Pivot frame assembly set screws
Stainless steel Stainless steel
BS 4183 18/8
9.5.61
8 Ball float and lever
BS 1449 304 S16
Valve cone (The valve cone is permanently attached to the ball float and lever)
9
Stainless steel
14 Support frame 15 Pivot frame
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
BS 1449 304 S16 BS 1449 304 S16
16 Pivot
18 Mounting plate
316L
DN40 bolts
A2-70 A2-70
19 Mounting plate fasteners
DN50 studs and nuts
Note: Parts 9 , 14 , 15 , 18 and 19 are shown on page 6.
TI-P148-07 CMGT Issue 12
Page 2 of 6
CA46S Austenitic Stainless Steel Air and Gas Trap DN40 and DN50
Powered by FlippingBook