Boiler house Level controls
2
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2020
TI-P693-40 EMM Issue 1
BTS1050 Boiler Blowdown Timer
Description
The BT1050 is a timer for the control of a bottom blowdown valve. It allows the bottom blowdown valve to open, removing precipitated solids that could otherwise build up and eventually cause damage. The BT1050's timers are controlled from a battery backed up Real Time Clock. A separate blowdown timer can be enabled for each weekday with different start, stop and repeat times. A simple copy feature allows the parameters to be copied to all days if required. A test function provides the operator with a diagnostic tool. Up to nine BTS1050 (or BCR3250) units can be installed and priority linked for multi-boiler installations. A limit switch box can be connected to monitor proper valve opening / closing action.
2.3 73
Principal features : - Purpose designed for bottom blowdown duties - Comprehensive timer options - Straightforward to commission – quick set-up option, using copy function - Power supply: 24V dc - Priority link and a recovery timer prevent boilers from blowing down in rapid succession - Warns if valve fails to open or close - Standby input to reduce boiler water loss if the boiler is on standby or low demand
Directives and standards LV (Low Voltage Directive) and EMC (Electromagnetic Compatibility) The equipment conforms to the requirements of the Low Voltage Directive 2014/35/EU and the EMC Directive 2014/30/EU.
Page 1 of 3
Powered by FlippingBook