Flowmetering Gilflo and ILVA flowmeters 3
Standards This flowmeter complies with the requirements of the EU Pressure Equipment Directive 2014/68/EU carries the
marks and falls
within the following PED categories:
Group 1 Gases
Group 2 Gases
Group 1 Liquids
Group 2 Liquids
Product
DN150 - DN200
3 3
3 3
2 2
SEP
ILVA20
DN250 - DN300
1
IP rating
IP65 with correct cable glands
Electromagnetic Compatibility Directive
2014/30/EU
UK Electromagnetic Compatibility Regulations 2016 Calibration
ISO 17025
Designed to ASME BPVC section V111
EN61010-1:2010 UL/CSA 61010-1:2012 (third edition)
Safety requirement for electrical equipment for measurement, control, and laboratory use
3.2 22
IP Testing
EN60529:1992/A2:2013
Electromagnetic Compatibility – Emissions and Immunity
EN 61326-2-3:2013
Sine Vibration Sequence Transportation Vibration
EN61298-3:2008 Section 7
EN60068-2-6:2008
Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement.
Sizes and pipe connections Available in DN150, DN200, DN250 and DN300 (6", 8", 10" and 12") pipeline sizes. This flowmeter is a wafer design suitable for fitting between the following flanges:
- EN 1092-1 PN16, PN25 and PN40 - ASME B 16.5 Class 150 and 300 - Japanese Industrial Standard JIS 20 - Korean Standard KS 20 Note: The Spirax Sarco flowmeter should be installed in pipework manufactured to BS 1600, ASME B 36.10 Schedule 40 or EN 10216-2/EN10216-5 equivalent.
Materials Flowmeter body
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Internals
316
2 way manifold 3 way manifold Impulse hoses MVT housing Pressure sensor
1.4408 CF8M
316L
Aluminium
Copper free aluminium, max 0.5 mg
Stainless steel Inconel X750
Spring
TI-P337-70 EMM Issue 9
Page 2 of 7
ILVA20 Flowmeter and MVT10 Differential Pressure Transmitter for Saturated and Superheated Steam Service
Powered by FlippingBook