Flowmetering Gilflo and ILVA flowmeters 3
Calibration The M610 Series II DP transmitter assembly is supplied with a span factor set to suit a particular application. However, should load conditions and/or details of actual installation change, the range of the M610 can be adjusted within the limits 0 - 1 326 mm (0 - 52.2”) H 2 O (0 - 13 kPa) and 0 - 13 256 mm (0 - 522”) H 2 O (0 - 130 kPa) as described in the Installation and Maintenance Instructions supplied with the product.
Installation Full installation details are given in the literature that accompanies the M610 Series II DP transmitter assembly.
Dimensions/weights (approximate) in mm (inches) and kg (lbs)
B
3.2 39
C
A
A
B
C
DP transmitter
3-Way manifold M610 assembly
220 (8.7)
193 (7.6)
175 (6.9)
6.5 kg (14.3)
1 kg (2.2)
7.5 kg (16.5)
How to order Example: 1 off Spirax Sarco M610 Series II DP transmitter assembly calibrated to give an output of 20 mA at an applied differential pressure of specified value.
Associated equipment: - Orifice plate flowmeter - Gilflo flowmeter system
TI-P335-10 EMM Issue 9
M610 Series II DP Transmitter Assembly
Powered by FlippingBook