Flowmetering Orifice plate flowmeters
3
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2014
TI-P176-04 MI Issue 7
Orifice Plate Flowmeters Customer Data Sheet
This customer data sheet is intended to gather together all relevant information necessary to size and specify a Spirax Sarco orifice plate flowmetering system. All equipment will be supplied to the customer based on the information received.
Company name
Address
3.4 5
Contact
Project reference
Notes
Please complete all sections and supply drawings, sketches etc. where appropriate.
Section A: Working fluid details Type of fluid (e.g., steam, air, water etc) Min. value
Normal value
Max. value
Units
Operating pressure
Operating temperature
Estimated rate of flow
Notes : The pressure drop at specified maximum rate of flow will be 24.9 kPa (100 inches water gauge) unless otherwise stated. Below 25% of specified maximum rate of flow, system accuracy cannot be guaranteed due to turndown limitations of orifice plates. (BS 1042 / ISO 5167).
TI-P176-04 MI Issue 7
Page 1 of 3
Orifice Plate Flowmeters Customer Data Sheet
Powered by FlippingBook