Boiler house Feedtank ancillaries
2
Available spares Glass 686 mm Glass 786 mm Glass 986 mm Glass 1086 mm Plastic tube (1100 mm) with 2 internal supports Spare packing seal set consisting of:- 4 off Packing sleeves 8 off Washers (1 fitted each side of the sleeve) 2 off Top plug gaskets The set is suitable for two re-packings of a gauge with no intermediate arm or one re-packing of a gauge with an intermediate arm. Order:- 1 spares pack for Water Level Gauge WG 2. How to specify Non-ferrous water level gauge with 3 port plug cock and protector rods (and 'C' section protector), glass tubes/plastic tubes.
Dimensions/weights (approximate) in mm and kg
Weight
Top arm
0.65
Intermediate arm
0.62
Bottom arm
0.69
Glass
100 mm length
0.145
Protector rod
100 mm length
0.015
'C' section protector
100 mm length
0.12
Plastic tube (1100 mm)
0.4
Top plug
2.1 16
Gasket
How to order Example: 1 off Spirax Sarco WG 2/1000 water level gauge with 'C' section protector and rods.
Top arm
85
Washer Seal Washer
Glass Ø12.7
82
Intermediate arm
Gland nut
Protector rod Ø4.8
'C' section protector
Bottom arm
70
½" BSP Tr (R½)
¼" BSP Pl (Rp¼)
52.5
4090050/4
TI-P409-04 EMM Issue 4
Page 4 of 4
WG2 Water Level Gauge
Powered by FlippingBook