Control systems Pressure reducing/surplussing valves
4
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2024
TI-P045-14 CTLS Issue 8
BRV2S and BRV2B SG Iron Pressure Reducing Valves
Description The BRV2S and BRV2B are direct acting pressure reducing valves designed for applications using steam or gases such as compressed air. This range of pressure reducing valves have SG iron bodies and are available with screwed or flanged connections. Available types BRV2S Stainless steel bellows BRV2B Phosphor bronze bellows BRV2SP Stainless steel bellows With external pressure sensing connection BRV2BP Phosphor bronze bellows BRV2 pressure reducing valves are supplied with one of three colour coded springs which are identified by the disc ( 18 ) located on the adjustment handwheel. Note: Where control spring ranges overlap always use the lower range to give better control:
4.6 1
0.14 to 1.7 bar g (2 to 25 psi g) 1.40 to 4.0 bar g (20 to 58 psi g) 3.50 to 8.6 bar g (51 to 125 psi g)
18
Grey
For downstream pressure control:
Green
For downstream pressure control:
Orange
For downstream pressure control:
Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED). Certification This product is available with a manufacturers' Typical Test Report. Note: All certification/inspection requirements must be stated at the time of order placement.
Sizes and pipe connections ½", ¾" and 1" screwed BSP (BS 21 Rp) or NPT. DN15, DN20 and DN25 flanged EN 1092 PN25.
TI-P045-14 CTLS Issue 8
Page 1 of 6
BRV2S and BRV2B SG Iron Pressure Reducing Valve
Powered by FlippingBook