Pipeline ancillaries Ball valves
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2024
TI-P133-86 CMGT Issue 2
M21HTi ISO (Tobacco) Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Description The M21HTi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. As a main feature the valve has a special ball which has received a surface hardening and also benefits from having Virgin PEEK seats. The M21HTi can be used on applications that use steam and other industrial fluids for services ranging from vacuum to the higher temperatures and pressures. The M21HTi has been designed for use as an isolating valve, not a control valve. Available types M21HTi2 ISO Zinc plated carbon steel body, Virgin PEEK seats. M21HTi3 ISO Stainless steel body, Virgin PEEK seats. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU and carries the mark when so required. Certification This product is available with certification to EN 10204 3.1. Note: All certification / inspection requirements must be stated at the time of order placement.
Sizes and pipe connections DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100 and DN150 Standard flange: EN 1092 PN40 Face-to-face dimensions:
Technical data Flow characteristic
Modified linear
Port Reduced bore Leakage test procedure to ISO 5208 (Rate A) / EN 12266-1 (Rate A) Antistatic device Complies with ISO 7121 and BS 5351
7.3.178
- DN15 to DN100 according to DIN 3202 F4. - DN25 to DN150 according to BS 2080.
DN65
DN15 to DN50 DN15 to DN50
10.3 177
TI-P133-86 CMGT Issue 2
Page 1 of 9
M21HTi ISO (Tobacco) Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Powered by FlippingBook