Steam traps Balanced pressure
8
Dimensions/weights (approximate) in mm and kg Size A A1 B C
E
F
G
Weight Scrd/SW/BW Flgd
½" DN15
95
150
94
64
37
63
28
1.65
3.15
¾" DN20
95
150
94
64
37
64
28
1.65
3.75
1" DN25
95
160
94
64
37
66
28
1.85
4.45
E Withdrawal distance
Capacities
B
C
F
A1 A
G Withdrawal distance
Differential pressure bar (x 100 = kPa)
5.2.43
Hot water capacity
Cold water capacity
Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-F01-30) supplied with the product. Installation note: The IBPC32 is designed for installation with the capsule in a horizontal plane with the cover at the top. It is recommended that a non-return valve is fitted when discharging condensate into return lines where backpressure is experienced. It is also recommended that a diffuser is fitted when discharging to atmosphere. For ease and maintenance, consideration should be given to fitting isolation valves upstream and downstream of the steam trap. Disposal The product is recyclable. No ecological hazard is anticipated with the disposal of this product, providing due care is taken. How to order Example: 1 off Spirax Sarco ½" IBPC32 carbon steel bodied maintainable balanced pressure thermostatic steam trap. Screwed BSP with 'STD' fill capsule for operation at approximately 12 °C below steam saturation temperature. The trap will be supplied with an integral sensor to identify waterlogging and steam wastage (WLS1 sensor) or for steam leakage only (SS1 sensor). Sensors to be compatible with Spiratec indicators, automatic monitors and test points: R1 (single trap) remote test point, R12 (12 trap) remote test point, Type 30 hand held indicator, R16C (16 traps) automatic steam trap monitor or R1C (single trap) automatic steam trap monitor with PNP/NPN output where appropriate.
8.2 62
TI-P005-06 CMGT Issue 5
Page 4 of 5
IBPC32 Carbon Steel Balanced Pressure Thermostatic Steam Trap with Integral Spiratec Sensor
Powered by FlippingBook