Pipeline ancillaries Ball valves
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2024
TI-P133-100 CMGT Issue 2
M40SiJ ISO and M40ViJ ISO Jacketed Reduced Bore Ball Valves DN40 to DN100 Flanged ASME 150
Description The M40_iJ ISO are jacketed reduced bore ball valves, having a single piece body and ISO mounting as standard. They have been designed for applications that use heating fluid to maintain the product viscosity passing through the ball valve (e.g. chocolate , tar, fat and others). These valves are isolating valves, not control valves. Available types
M40SiJ2 ISO Carbon steel body, PDR 0.8 seats. M40SiJ3 ISO Stainless steel body, PDR 0.8 seats. M40ViJ2 ISO Carbon steel body, PTFE seats. M40ViJ3 ISO Stainless steel body, PTFE seats.
Standards These products fully comply with the requirements of the European Pressure Equipment Directive 2014/68/EU and carry the mark when so required. Certification These products are available with certification to EN 10204 3.1. Note: All certification / inspection requirements must be stated at the time of order placement.
Sizes and pipe connections DN40, DN50, DN65, DN80 and DN100 Standard flange: ASME 150 with face-to-face dimensions according to ASME 16.10 Jacket input and output connections: Threaded ½" BSPT
10.3 267
DN40 and DN50
DN65
TI-P133-100 CMGT Issue 2
Page 1 of 9
M40SiJ ISO and M40ViJ ISO Jacketed Reduced Bore Ball Valves DN40 to DN100 Flanged ASME 150
Powered by FlippingBook