Pipeline ancillaries Ball valves
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2018
TI-P133-91 CMGT Issue 3
Description The M33HT ISO is a full bore, two-piece body, ball valve with floating ball and has ISO mounting, as standard. As a main feature the valve has a special ball which has received a surface hardening and also has benefits from having virgin PEEK seats. The M33HT ISO has been designed for use as an isolating valve, not a control valve, and can be used in Teflon free steam applications such as the Tobacco Industry. It is not recommended for gases applications. Available types M33HT2 ISO Zinc plated carbon steel body, Virgin PEEK seats. M33HT3 ISO Stainless steel body, Virgin PEEK seats. M33HT ISO Full Bore Ball Valve for the Tobacco Industry DN50 to DN200 Flanged ASME 150 and ASME 300
Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED) and carries the
mark when so
required.
Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement. Options - Hollow ball for DN150 and DN200 sizes - Not API 6D rated. - Self-venting ball. - Ring joint flanges. - Extended stems to allow full insulation. - Operation by pneumatic actuator BVA300 series for all sizes. - Operation by pneumatic actuator BVA300 series and declutchable gearbox. - Operation by gearbox. - Lockable handle. - Materials according to NACE MR0175.
10.3 287
- Relief valve. - Drain plug. Sizes and pipe connections DN50, DN65, DN80, DN100, DN150 and DN200. Standard flange ASME 150 and ASME 300 with face-to-face dimensions according to ASME B 16.10.
DN50 shown
Page 1 of 7
Powered by FlippingBook