Pipeline ancillaries HV3 stop valve Ball valves
Pipeline ancillaries Lift check valves 10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P029-01 CTLS Issue 12
LCV1 Bronze Lift Check Valve
Description The LCV1 is a bronze lift check valve which is installed in horizontal lines to prevent reverse flow. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is available with certification to EN 10204 2.2. Note: All certification/inspection requirements must be stated at the time of order placement.
Sizes and pipe connections ½ ", ¾ ", 1", 1 ¼ ", 1 ½ " and 2". Screwed BSP T Rp (ISO 7-1) or NPT
Materials
3
1
2
10.1 1 10.4
No.
Part
Material
1 2 3
Body
Bronze
EN 1982 CC491K
Cone
Brass
BS 2874 CZ 114
Cap
Brass
EN 12165 CW617N
TI-P029-01 CTLS Issue 12
Page 1 of 3
LCV1 Bronze Lift Check Valve
Powered by FlippingBook