Pipeline ancillaries Strainers and filters
10
Material of Filter Housing (Bowl and Head)
Filter Housing model
Connection type (Bowl and Head)
Internal surface finish
External surface finish
Sizes
Etched, Passivated and Polished Ra 1.6µm
DN8 (¼") to DN80 (3")
Food industry fitting to DIN 11851
CSF16, CF16L*, CSF16H*
Etched, Passivated and Polished Ra 0.8µm
1.4301 (304 stainless steel)
DN100 (4") and DN150 (6") DN8 (¼") to DN80 (3") DN100 (4") and DN150 (6")
Etched and Passivated, Ra 5.8 micron
Nuts and Bolts
Etched, Passivated and Polished Ra 1.6µm
Food industry fitting to DIN 11851
CSF16T, CF16LT*, CSF16HT*
Etched, Passivated and Polished Ra 0.8µm
1.4404 (316L stainless steel)
Etched and Passivated, Ra 5.8 micron.
Nuts and Bolts
*In some pipe sizes the housing is available in a choice of low capacity designated 'L' and high capacity designated 'H'. Replaceable elements in sintered austenitic stainless steel are available with either 1, 5 or 25 micron absolute rating. These are ordered separately to the Filter Housing.
Standards These products fully comply with the requirements of the EU Pressure Equipment Directive 2014/68/EU and carry the
mark when
so required.
Product variants that are PED Category 1 (Cat.1) are also compliant to PE(S)R and carry the
mark.
The CSF16/CSF16T steam filters also comply with other country specific approvals: When fitted with a 5 micron filter element, they are capable of removing 95% of particles 2 microns and larger in size, in accordance with the requirements for the production of culinary steam to 3A accepted practice number 609-03 (accepted in the US). This is subject to the installation being in accordance with 3A best practice guidelines (See installation section in IM-P180-42). Department of Agriculture for use in federally inspected meat and poultry plants. All materials meet the requirements as stipulated by the US FDA Title 21 of Code of Federal Regulations. All constituent materials and the finished product comply with EC1935:2004 and EC2023:2006 The complete product and component parts are, manufactured, assembled, tested and packaged in a facility verified and approved by an accredited registered body to ISO 9001:2015. Certification The CSF16/CSF16T can be supplied with material certification as per the table below. Note: All certification/inspection requirements must be stated at the time of order placement.
Housing PED Category (SEP, Category I, Category II)
EN10204 Inspection Documents
SEP
No certification supplied
10.6 102
Cat. I
No certification supplied
Cat. II
Type 3.1 (Inspection Certificate)
If type 3.1 certification is required for SEP or Cat. I Filter Housings, this must be ordered separately. If type 3.1 certification is required for the filter elements, this must be ordered separately.
TI-P180-43 CMGT Issue 5
Page 2 of 21
CSF16 and CSF16T Stainless Steel Steam Filters
Powered by FlippingBook