Pipeline ancillaries Separators and insulation jackets
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P023-25 CMGT Issue 5
S12 SG Iron Separator (Screwed)
7.7.10
Description The S12 separator is an SG iron baffle type separator used for the removal of entrained liquids in steam, compressed air or gas systems. The fitting of insulation jackets will increase the performance of the separator. Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED). Certification This product is available with a manufacturers' Typical Test Report. Note: All certification/inspection requirements must be stated at the time of order placement.
10.7 11
Sizes and pipe connections 1¼", 1½" and 2" screwed BSP with screwed BSP drain or 1¼", 1½" and 2" screwed NPT with screwed NPT drain.
TI-P023-25 CMGT Issue 5
Page 1 of 3
S12 SG Iron Separator (Screwed)
Powered by FlippingBook