Pipeline ancillaries Separators and insulation jackets
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P023-12 CMGT Issue 18
S6 Austenitic Stainless Steel Separator
Description The S6 is an austenitic stainless steel (316L) baffle type separator used for the removal of entrained liquids in steam, compressed air and gas systems. Optional extras Insulation jackets are available which will increase the performance of the separator, (see TI-P138-01). Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU and carries the mark when so required. Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement.
7.7.36
10.7 31
Sizes and pipe connections ½ ", ¾ ", 1", 1 ¼ ", 1 ½ " and 2" Screwed BSP T Rp (ISO 7-1) or NPT, butt weld, socket weld. DN15, DN20, DN25, DN32, DN40 and DN50. Flanged EN 1092 PN40 with screwed BSP drain and air vent. Flanged BS 1560 (ASME B 16.5) Class 150 or 300 with screwed NPT drain and air vent. Flanged JIS/KS 10K and 20K with screwed BSP drain and air vent. Note: For larger sizes use an S8 separator. See TI-P138-10.
TI-P023-12 CMGT Issue 18
Page 1 of 5
S6 Austenitic Stainless Steel Separator
Powered by FlippingBook