Pipeline ancillaries Separators and insulation jackets
10
Weights/volume (approximate) kg (lbs) and litres (gallons) Size Weight
Volume
Screwed Socket weld Butt weld
Screwed Socket weld Butt weld
Flanged
Flanged
6.0 (13.2) 6.9 (15.2) 12.2 (26.9) 16.2 (35.7) 22.5 (49.6) 24.4 (53.8)
7.5 (16.5) 9.2 (20.3) 15.1 (33.3) 20.4 (45.0) 27.3 (60.2) 30.8 (37.9)
0.71 (0.188) 0.90 (0.24) 2.83 (0.75) 4.15 (1.10) 6.93 (1.83) 7.74 (2.04)
0.72 (0.19) 0.92 (0.24) 2.86 (0.76) 4.19 (1.11) 7.00 (1.85) 7.88 (2.08)
DN15 - ½"
DN20 - ¾"
DN25 - 1"
DN32 - 1¼"
DN40 - 1½"
DN50 - 2"
Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-P023-55) supplied with the product. Installation note Install in a horizontal pipeline with the drain directly below.
To ensure that any separated liquid is drained quickly, a suitable steam trap/liquid drainer must be connected to the drain connection. For those steam systems where air can be present, air can collect in the upper portion of the separator. In this situation a suitable air vent should be connected to the air vent connection. If an air vent is not being fitted then the connection must have the plastic transit protection plug removed and must have a stainless steel class 3 000 lb plug fitted. Disposal The product is recyclable. No ecological hazard is anticipated with disposal providing due care is taken.
7.7.40
How to order Example: 1 off Spirax Sarco DN20 S6 separator with an austenitic stainless steel body flanged to EN 1092 PN40.
10.7 35
TI-P023-12 CMGT Issue 18
Page 5 of 5
S6 Austenitic Stainless Steel Separator
Powered by FlippingBook