Pipeline ancillaries Separators and insulation jackets
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2019
TI-P138-01 CMGT Issue 7
IJ-S5, IJ-S6, IJ-S5-H and IJ-S6-H Insulation Jackets for S5 and S6 Separators
7.7.44
IJ-S5/IJ-S6 shown fitted to flanged separator
IJ-S5-H/IJ-S6-H shown fitted to flanged separator
Description A range of insulation jackets for fitting to S5 and S6 separators. The jackets are of a one piece design for either low temperature or high temperature applications - see 'Available types' below. Separate jackets are also available for flanged pipeline joints. Please refer to separate literature, TI-P119-01. TI-P138-02 gives details of a payback calculator based on the energy saving to be made by fitting an insulation jacket. Available types
10.7 45
IJ-S5 and IJ-S6
Low temperature version
Available in low temperature version (with velcro fastening) and high temperature version (with strap/buckle fastening) one piece jackets for insulating DN15 to DN50, S5 and S6 separators.
IJ-S5-H and IJ-S6-H
High temperature version
Limiting conditions
IJ-S5 and IJ-S6
220 °C
Maximum metal surface temperature
IJ-S5-H and IJ-S6-H
425 °C
Thermal conductivity
0.044 W/m K at 100 °C
Page 1 of 4
Powered by FlippingBook