Pipeline ancillaries Pressure gauges and temperature gauges
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2022
TI-P027-01 CMGT Issue 14
BSP Pressure Gauge with Syphon and Cock
Description Pressure gauge with 100 mm diameter dial with units marked in bar, psi and inches hg for vacuum as appropriate and having a BSP connection. The gauge is supplied with either: - Ring type syphon tube and cock or a 'U' type syphon tube and cock.
For the following options, consult Spirax Sarco: Pressure gauges with NPT connections.
Available pressure range
Range
0 to 1.6 bar
0 to 23 psi
Range*
0 to 4.0 bar
0 to 53 psi
Range*
0 to 6.0 bar
0 to 86 psi
Range*
0 to 10.0 bar
0 to 145 psi
Steel Note: Where indicated (*) a dial with MPa units is available.
Range*
0 to 16.0 bar
0 to 230 psi
Range*
0 to 25.0 bar
0 to 360 psi
Range
-1 to 1.5 bar 30" Hg to 20 psi
7.10.2
Range
-1 to 3.0 bar 30" Hg to 40 psi
Range
-1 to 5.0 bar 30" Hg to 70 psi
Range
0 to 4.0 bar
0 to 53 psi
Range
0 to 10.0 bar
0 to 145 psi
Stainless steel
Range
0 to 16.0 bar
0 to 230 psi
Range
0 to 25.0 bar
0 to 360 psi
10.10 1
Standards The product fully complies with the requirements of the EU Pressure Equipment Directive/UK Pressure Equipment (Safety) Regulations. This pressure gauge conforms to: - DIN EN 837-1:1997-02 Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing, and - DIN EN 837-1:1997-02 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing
Certification A certificate of conformity is available as standard for this product. A calibration certificate is available by special order at extra cost.
TI-P027-01 CMGT Issue 14
Page 1 of 4
BSP Pressure Gauge with Syphon and Cock
Powered by FlippingBook