Pipeline ancillaries Air vents and air eliminators
10
Pressure/temperature limits (ISO 6552)
150 177
100
Steam saturation curve
50
0
2
4
6
8
10
0
Pressure bar g
The product must not be used in this region. The product should not be used in this region as damage to the internals may occur.
Note: For hygienic/sanitary clamp ends the maximum pressure/temperature may be restricted by the gasket or sanitary clamp used. Please consult Spirax Sarco.
Body design condition
PN10
PMA Maximum allowable pressure
9.7 bar g @ 38 °C
TMA Maximum allowable temperature
171 °C @ 7.1 bar g
Minimum allowable temperature
-10 °C
PMO Maximum operating pressure for saturated steam service
6 bar g
TMO Maximum operating temperature
165 °C @ 6 bar g
Minimum operating temperature
0 °C
Designed for a maximum cold hydraulic test pressure of:
14.55 bar g
Note: Refer to IM-P080-02 for instruction on how to perform hydraulic testing.
10.11 17
TI-P080-01 CMGT Issue 9
Page 3 of 6
AVM6.1 and AVM6.1 Food+ Balanced Pressure Sanitary Thermostatic Air Vent
Powered by FlippingBook