Pipeline ancillaries Air vents and air eliminators
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2024 In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P133-95 CMGT Issue 4 TI-P017-07 CMGT Issue 15
M40Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN25 to DN200 Flanged ASME 150 and ASME 300 Description The M40Ti is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. As a main feature the valve has UHMWPE seats. The M40Ti has been designed for use as an isolating valve, not a control valve, and can be used on Teflon free process applications at moderate temperatures. The M40Ti ISO is not suitable for steam applications. Available types M40Ti2 ISO Zinc plated carbon steel body, UHMWPE seats. M40Ti3 ISO Stainless steel body, UHMWPE seats. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU and carries the mark when so required. Certification This product is available with certification to EN 10204 3.1. Note: All certification / inspection requirements must be stated at the time of order placement. The fitted lockshield valve (versions AE30B and AE30C) has a unique 3 way locking system enabling the valve to be either locked open, locked closed or be used as conventional ball valve. You will need to use a standard socket set (not included with the product) to operate the valve. Standards This product fully complies with the requirements of the European Pressure Equipment Directive. Certification Sizes and pipe connections DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN150 and DN200. Standard flanges ASME 150 and ASME 300 with face-to.face dimensions according to ASME B16.10. This product is available with a manufacturer's Typical Test Report. Note: All certification/inspection requirements must be stated at the time of order placement. AE30, AE30A, AE30B and AE30C Automatic Air Eliminators/ Air and Gas Vents for Liquid Systems Description The AE30 range of automatic air eliminators/air and gas vents are designed for use on liquid installations.The body and the cap are made from a special brass alloy, which is dezincification resistant (DZR). Available options AE30 Air eliminator/air vent AE30A Air eliminator/air vent with check valve AE30B Air eliminator/air vent with lockshield AE30C Air eliminator/air vent with check valve and lockshield
7.11.24
Sizes and pipe connections AE30, AE30A: Inlet ½ " female, outlet ¼ " male both BSP or NPT. AE30B, AE30C: Inlet ½ " male, outlet ¼ " male both BSP.
DN25 to DN50
10.11 33
DN65
TI-P133-95 CMGT Issue 4 TI-P017-07 CMGT Issue 15
Page 1 of 9 Page 1 of 6
M40Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN25 to DN200 Flanged ASME 150 and ASME 300 AE30, AE30A, AE30B and AE30C Automatic Air Eliminators/Air and Gas Vents for Liquid Systems
Powered by FlippingBook