Steam traps Bimetallic
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2024
TI-P624-02 CMGT Issue 7
SP80 and SP100 Bimetallic Steam Traps
Description The SP80 and SP100 are pilot operated bimetallic steam traps made of cast steel. They have a built-in strainer screen to protect the pilot valve and an external device for adjusting the discharge temperature of the condensate. They are specially designed for high capacity process applications. They are not sensitive to overheating and have a bimetallic pilot device which controls a main valve via a large diameter piston. These steam traps can be repaired inline and operate with no loss of steam. They quickly drain air, non-condensable gases and large quantities of cold water on start-up.
Available types SP80N and SP100N
For use at low pressures
SP80E and SP100E
For use at medium pressure
Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is available with certification to EN 10204 3.1. Note : All certification/inspection requirements must be stated at the time of order placement.
8.3 31
Sizes and pipe connections DN80 SP80 or DN100 SP100 with Flanged EN 1092 PN40, ASME 150 or ASME 300 connections.
TI-P624-02 CMGT Issue 7
Page 1 of 7
SP80 and SP100 Bimetallic Steam Traps
Powered by FlippingBook