Steam traps Ball float
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P615-01 CMGT Issue 8
IFT14 Ball Float Steam Trap with Integral Spiratec Sensor
Description The IFT14 is an SG iron bodied ball float steam trap having stainless steel working internals, integral Spiratec sensor and automatic air venting facility. It can be supplied with either a WLS1 sensor to detect waterlogging and steam leakage or a SS1 sensor for steam leakage only. The IFT14 is supplied with horizontal connections, having flow from right to left (R – L), and can be simply integrated into all existing Spiratec monitoring systems. Capsule The BP99/32 capsule which is used in the FT14 is suitable for use on 150 °C (270 °F) superheat @ 0 bar g (0 psi g) and 50 °C (91 °F) superheat @ 32 bar g (464 psi g). Standards The product fully complies with the requirements of the Pressure Equipment Directive (PED). Certification This product is available with a manufacturers' Typical Test Report. Note: All certification/inspection requirements must be stated at the time of order placement. Sizes and pipe connections ½" and ¾" screwed BSP or NPT.
5.5.10
8.5 11
TI-P615-01 CMGT Issue 8
Page 1 of 6
IFT14 Ball Float Steam Trap with Integral Spiratec Sensor
Powered by FlippingBook