Steam traps Ball float
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-S02-26 CMGT Issue 13
FT14 Ball Float Steam Trap (Flanged)
Description The FT14 is an SG iron bodied ball float steam trap having stainless steel working internals and integral automatic air venting facility. The FT14 can be maintained without disturbing the pipework.
Available types
FT14 (R-L)
Horizontal connections with flow from right to left
FT14 (L-R)
Horizontal connections with flow from left to right
Please note: On the cover of both of these traps, the orientation of the connections can be adjusted on site in preparation of downward vertical flow applications. Capsule The BP99/32 capsule which is used in the FT14 is suitable for use on 150 °C (270 °F) superheat @ 0 bar g (0 psi g) and 50 °C (90 °F) superheat @ 32 bar g (464 psi g).
Optional extras
5.5.16
A manually adjustable needle valve (designated 'C' on the nomenclature i.e. FT14-C ) can be fitted to the trap. This option provides a steam lock release (SLR) feature in addition to the standard air vent. For further information please consult Spirax Sarco. The FT14 has the option of an integral strainer screen (designated 'X' on the nomenclature i.e. FT14X- ).
Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is available with a manufacturers' Typical Test Report. Note: All certification /inspection requirements must be stated at the time of order placement.
8.5 17
FT14-C (R-L)
FT14 (R-L)
Main valve assembly DN25 (1")
TI-S02-26 CMGT Issue 13
Page 1 of 6
FT14 Ball Float Steam Trap (Flanged)
Powered by FlippingBook