Steam traps Ball float
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-S02-27 CMGT Issue 11
FT14 and FT14HC SG Iron Ball Float Steam Traps (1" HC, 1¼", 1½" and 2")
FT14HC 1" FT14 1¼"
FT14 1½" and 2"
5.5.20
FT14-C
8.5 23
Description The FT14 and FT14HC are iron bodied ball float steam traps having stainless steel working internals and integral automatic air venting facility. These traps are supplied with horizontal screwed connections only and can be maintained without disturbing the pipework. The flow direction is as indicated on the valve body. Available types FT14 Standard 1¼", 1½" and 2" FT14HC High capacity (1" only) - As standard the FT14HC is available with flow direction in either left-to-right or right-to-left direction. Please state preference when placing an order.
Note: These ball float steam traps are available with either 4.5, 10 or 14 bar (65, 145, 203 psi) internals ( PMX).
Capsule The BP99/32 capsule which is used in the FT14 and FT14HC ball float steam traps is suitable for use on 150 °C (270 °F) superheat @ 0 bar g (0 psi g) and 50 °C (91 °F) superheat @ 32 bar g (464 psi g). Optional extras will only be supplied if specified at the point of order A manually adjustable needle valve (designated 'C' on the nomenclature i.e. FT14-C ) can be fitted to the trap. This option provides a steam lock release (SLR) feature in addition to the standard air vent. For further information please consult Spirax Sarco. The top of the cover can be drilled and tapped up to 3/8 " BSP T Rp (ISO 7-1) or NPT for the purpose of fitting a balance line. The bottom of the cover can be drilled and tapped 3/8 " BSP T Rp (ISO 7-1) or NPT for the purpose of fitting a drain cock.
TI-S02-27 CMGT Issue 11
Page 1 of 8
FT14 and FT14HC SG Iron Ball Float Steam Traps (1" HC, 1¼", 1½" and 2")
Page 1 of 5
Powered by FlippingBook