Steam traps Ball float
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2019
TI-S02-22 CMGT Issue 10
FT43 Cast Iron Ball Float Steam Traps DN80 and DN100
Description The FT43 is a cast iron bodied ball float steam trap having stainless steel working internals and automatic air venting facility. It is available with horizontal flanged connections only. If required, the covers can be drilled and tapped " BSP or NPT for the purpose of fitting drain cocks. Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED) and carries the mark when so required. Certification This product is available with a manufacturer’s Typical Test Report. Note: All certification/inspection requirements must be specified at the time of order placement. Sizes and pipe connections DN80 and DN100 Standard flange: EN 1092 PN16. Flanges available on request: JIS 10, KS 10 and ASME 125.
5.5.68
8.5 71
Page 1 of 5
Powered by FlippingBook