Steam traps Ball float
8
Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-S02-30) supplied with the product. Installation note: The FT46 must be installed with the direction of flow as indicated on the body, and with the float arm in a horizontal plane so that it rises and falls vertically. Disposal This product is recyclable. No ecological hazard is anticipated with the disposal of this product providing due care is taken. How to order Note: Although FT46 4.5 bar - 21 bar (65 psi - 305 psi) versions are fitted with a capsule air vent assembly as standard, they can be fitted with a bimetallic air vent assembly upon request. Example: 1 off Spirax Sarco DN25 FT46-21 ball float steam trap, having an austenitic stainless steel body and cover with a bimetallic air vent assembly. Connections are to be flanged to EN1092 PN40. Note: Although the FT46 32 bar (464 psi) is fitted with a bimetallic air vent assembly as standard, it can be fitted with a capsule air vent assembly and steam lock release feature upon request. Example: 1 off Spirax Sarco DN25 FT46-21 ball float steam trap, having an austenitic stainless steel body and cover with a capsule air vent assembly. Connections are to be flanged to EN1092 PN40.
5.5.87
8.5 98
TI-P143-01 CMGT Issue 15
Page 8 of 10
FT46 Stainless Steel Ball Float Steam Traps DN15 to DN50 (½" to 2")
Powered by FlippingBook