Steam traps Steam trap management
8
How does it work? A head unit assembly mounted on the pipe upstream of the trap to be monitored 'listens' to the sound signature of the trap in operation. This sound signature is categorised and transmitted via 2.4 GHz wireless network to a central PC. The PC determines the trap condition and calculates any steam loss. Each STAPS head unit assembly is powered by a long life Lithium battery (typical battery life of over 3 years). It can communicate directly to a receiver that is connected to the PC software via a LAN connection or via another intelligent head or repeater. The PC software can be installed onto a PC on the sites internal network, or onto a standalone local PC. The STAPS head, repeater and receiver create a network and can communicate with each other, passing on the steam trap data to the supervisory PC. The illustration below illustrates a typical network.
Building 2
Building 1
PC
Head unit
Intelligent head unit
Steam trap
Receiver
Repeater
Control room
LAN
Building 2
Building 1
8.1 26
PC
Head unit
Intelligent head unit
Building 3
Steam trap
Router / Repeater
Network switch
Control room
TI-P014-02 EMM Issue 5
Page 4 of 6
STAPS Wireless Steam Trap Monitoring System
Powered by FlippingBook