Steam traps Ball float
8
Spare parts The spare parts available are shown in solid outline. Parts shown in a broken line are not supplied as spares. Available spares Main valve assembly with float (DN15, DN20 and DN25)
5, 6, 10, 12, 13, 14, 15
7, 8, 9, 16
Main valve assembly with erosion deflector (DN40 and DN50)
11
Ball float
(DN40 and DN50 only)
17, 18
Air vent assembly
3, 9, 18, 20
Complete set of gaskets (packet of 3)
24, 25
Sensor and gasket
How to order spares Always order spare parts by using the description given in the column headed 'Available spares' and state the size, Model No., orientation i.e. horizontal (H) or vertical (V) and pressure rating of the trap. Example: 1 - Main valve assembly for a DN40 IFT54H-16 ball float steam trap. For operating pressures up to 16 bar.
IFT57H shown
3
Air vent assembly 17
18
4 (Not an available spare)
11
7 16 8 9
Main valve assembly for DN40 and DN50 size traps with erosion deflector
8.5 164
15
5 12
25 24 Integral Spiratec sensor
Main valve assembly with float for DN15, DN20 and DN25 size traps 10 136 14
TI-P615-03 CMGT Issue 6
Page 6 of 7
IFT57 SG Iron Ball Float Steam Trap with Integral Spiratec Sensor and Flanged Connections
Powered by FlippingBook