Steam traps Ball float
8
Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-P179-06) supplied with the product. Installation note
The FTC80 must be installed with the direction of flow as indicated on the body, and with the float arm in a horizontal plain so that it rises and falls vertically. Integral legs assist stable floor mounting. Please note that appropriate high temperature jointing compound must be used on the drain plug and air vent plug threads. Disposal This product is recyclable. No ecological hazard is anticipated with the disposal of this product providing due care is taken. Please visit the Spirax Sarco product compliance web pages https://www.spiraxsarco.com/product-compliance for up to date information on any substances of concern that may be contained within this product. Where no additional information is provided on the Spirax Sarco product compliance web page, this product may be safely recycled and/or disposed providing due care is taken. Always check your local recycling and disposal regulations.
How to order Example: 1 off Spirax Sarco 1 ½ " FTC80-45 (R-L) ball float steam trap with ASME Class 6000 weld connections and screwed BDV2 manual air vent complete with 3.1 certification for the FTC80 and BDV2.
8.5 172
TI-P179-02 CMGT Issue 8
Page 6 of 7
FTC80 Cast Steel 1½" and 2" Ball Float Steam Trap with ASTM Body
Powered by FlippingBook