Steam traps Inverted bucket
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P077-01 CMGT Issue 9
S and SF Series Cast Iron Inverted Bucket Steam Traps
Description The S and SF series are a range of inverted bucket steam traps. The body and cover are constructed from cast iron and the complete unit is readily maintainable. Available options S series In-line connections and integral strainer SF series Integral flanged connections and integral strainer
Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is available with typical test certificates. Note: All certification/inspection requirements must be stated at the time of order placement. Sizes and pipe connections ½" - SA, ¾" - SB, 1" - SC, 1½" - SD screwed BSP T Rp (ISO 7-1) and NPT DN15 - SFA, DN20 - SFB, DN25 - SFC, DN40 - SFD Standard flange EN 1092 PN16
5.6.16
8.6 13
Screwed ½"
Flanged DN15
TI-P077-01 CMGT Issue 9
Page 1 of 6
S and SF Series Cast Iron Inverted Bucket Steam Traps
Powered by FlippingBook