Steam traps Inverted bucket
8
Dimensions/weights (approximate) in mm (inches) and kg (lbs)
A B A1
Withdrawal distance C
F
G
Withdrawal distance for strainer screen H
Thread J
Screwed and socket weld connections Size A B
C
F
G
H
J
Weight
5.6.34
67 (2.64) 88 (3.46) 145 (5.71)
89 (3.50) 107 (4.21) 120 (4.72)
2.6 (5.7) 4.0 (8.8)
½"
M28
120 (4.72)
105 (4.13)
100 (3.94)
65 (2.56)
¾"
M28
180 (7.09)
160 (6.30)
160 (6.30)
85 (3.35)
10.4 (22.9)
1"
M32
Flanged connections Size A1
B
C
F
G
H
J
Weight
8.6 31
67 (2.64) 88 (3.46) 145 (5.71)
89 (3.50) 107 (4.21) 120 (4.72)
4.5 (9.9)
DN15
M28
210 (8.27)
105 (4.13)
100 (3.94)
65 (2.56)
7.0 (15)
DN20
M28
230 (9.06)
160 (6.30)
160 (6.30)
85 (3.35)
12.0 (26.5)
DN25
M32
Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-S03-11) supplied with the product. Installation note
The trap must be installed with the body upright so that the bucket is rising and falling vertically. The inlet and outlet connections should be in a horizontal plane, with the trap installed below the drain point so that a water seal can be maintained around the open end of the bucket.
Dis posal This product is recycable. No ecological hazard is anticipated with the disposal of this product providing due care is taken.
How to order Example: 1 off Spirax Sarco ½ " HM34/8 inverted bucket steam trap with screwed BSP T Rp (ISO 7-1) connections.
TI-P072-01 CMGT Issue 10
Page 7 of 8
HM34 Series Carbon Steel Inverted Bucket Steam Traps
Powered by FlippingBook