Steam traps Thermodynamic
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2018
TI-P156-01 CMGT Issue 3
TD10 Thermodynamic Steam Trap
Description The TD10 is a miniature thermodynamic disc trap designed specifically for draining small steam users like steam irons and instrument tracers. Certification This product is available with certification to EN 10204 2.2. Note: All certification/inspection requirements must be stated at the time of order placement. Sizes and pipe connections ¼" swagelock outlet/BSP inlet (union and ferrule not supplied). ¼" BSP taper male inlet/BSP outlet.
2
3
5.7.2
Outlet
To suit swagelock fitting
1
Pressure/temperature limits
8.7 1
Steam saturation curve
Materials No. Part
Material
Pressure bar g
1 2 3
Body
Stainless steel
BS 970 420 S37
The product must not be used in this region.
Cap
Stainless steel
AISI 416
Disc
Stainless steel
BS 1449 420 S45
* PMO Maximum operating pressure recommended 10 bar g. PMOBMaximum operating back pressure 50% of upstream pressure.
Body design conditions
PN16
PMA Maximum allowable pressure
16 bar g
TMA Maximum allowable temperature
350°C
PMO Maximum operating pressure
10 bar g
TMO Maximum operating temperature 350°C Designed for a maximum cold hydraulic test pressure of 24 bar g
Powered by FlippingBook