Steam traps Thermodynamic
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2014
TI-P068-06 ST Issue 7
TD259 and TD259A Thermodynamic Steam Traps
Description The TD259 is a maintainable thermodynamic steam trap for use on instrument tracing or any small bore steam heating installations. It can be provided with an anti-air-binding disc for quick start-up on batch process and is designated TD259A. Standards The product fully complies with the requirements of the European Pressure Equipment Directive 97/23/EC. Certification This product is available with a manufacturer's Typical Test Report. Note : All certification/inspection requirements must be stated at the time of order placement.
Sizes and pipe connections ¼" screwed BSP or NPT.
5.7.4
Materials No. Part
Material
1 2 3
Body
Stainless steel
AISI 420
Cap
Stainless steel
AISI 416
Disc
Stainless steel
BS 1449 420 S45
3
2
8.7 7
1
TD259A anti-air-binding disc
TI-P068-06 ST Issue 7
Page 1 of 3
TD259 and TD259A Thermodynamic Steam Traps
Powered by FlippingBook