Steam traps Thermodynamic
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2018
TI-P614-01 CMGT Issue 4
ITD32 Thermodynamic Steam Trap with Integral Spiratec Sensor
Description The ITD32 is a maintainable thermodynamic steam trap supplied fitted with an integral Spiratec sensor: Available sensor options: SS1 Sensor to detect steam leakage only. WLS1 Sensor to detect waterlogging and steam leakage. WLS1 and Diode pack
Sensor to detect waterlogging and steam leakage for use with R16C steam trap monitor.
The ITD32 can be simply integrated into all existing Spiratec monitoring systems. All external body surfaces have an electroless nickel plate (ENP) finish which is both energy saving and oxidation resistant. For those applications where the release of air is a concern, an anti-air-binding disc is available i.e. ITD32LA and ITD32HA. ITD32 trap options: ITD32L Low capacity. ITD32LA Low capacity and anti-air-binding disc. ITD32H High capacity. ITD32HA High capacity and anti-air-binding disc. Standards The product fully complies with the requirements of the Pressure Equipment Directive (PED). Certification This product is available with a manufacturers' Typical Test Report. Note: All certification/inspection requirements must be stated at the time of order placement. Sizes and pipe connections ITD32L and ITD32LA ½" and ¾" screwed BSP or NPT. ITD32H and ITD32HA ½" screwed BSP or NPT. Optional extras Insulating cover: to prevent the trap being unduly influenced by excessive heat loss such as when subjected to low outside temperatures, wind, rain etc.
5.7.8
8.7 11
ITD32LA and ITD32HA Anti-air-binding disc
Page 1 of 5
Powered by FlippingBook