Steam traps Thermodynamic
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P068-17 CMGT Issue 8
TD32F Flanged Thermodynamic Steam Trap
Description The TD32F is a maintainable medium pressure flanged thermodynamic steam trap which has an integral strainer screen fitted to protect the internals from dirt. The TD32FLC is designed specifically for low load applications such as steam mains drainage applications. The TD32FA and TD32FALC are fitted with an anti-air-binding disc to ensure prompt removal of air on start-up. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement. Sizes and pipe connections DN15, DN15LC, DN20, DN20LC, DN25 and DN25LC Flanged ASME (ANSI) B 16.5 Class 150 and 300, DIN 2501 PN40 and JIS/KS 10, 16 and 20. Optional extras Insulating cover (for the DN15 and DN20 only): To prevent the trap being unduly influenced by excessive heat loss such as when subjected to low outside temperatures, wind, rain etc.
5.7.14
TD32F
The TD32FALC version is identified by the groove in the cap
8.7 17
The TD32FA and TD32FALC have an anti-air-binding disc
TI-P068-17 CMGT Issue 8
Page 1 of 5
TD32F Flanged Thermodynamic Steam Trap
Powered by FlippingBook