Steam traps Balanced pressure
Steam traps Balanced pressure
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2019
TI-P061-03 CMGT Issue 4
BT6 Horizontal Sanitary Balanced Pressure Thermostatic Steam Trap Description
The Spirax Sarco BT6 Horizontal Sanitary balanced pressure steam trap is designed to remove condensate from clean and pure steam applications with minimal condensate retention. Applications include sterile steam barriers, block and bleed installations, mains drainage, CIP/SIP of vessels and reactors and process lines. Manufactured in 316L, the crevice free body design of the BT6- Horizontal incorporates an angled seat to ensure its self draining and operates close to steam temperature. Each trap is individually packaged within an ISO CLASS 7 ‘clean’ environment with protective end caps and sealed in a protective plastic bag. Body surface finish (measured to ISO-4287-1997 and ISO 4288-1997) Internal surfaces to have a finish of 0.5 µm Ra, (20 micro-inch Ra,). External surfaces to have a finish of 1.2 µm Ra, (48 micro-inch Ra). Options Fixed bleed to ensure ‘FAIL OPEN’ operation. Standards The BT6 HORIZONTAL has been designed and built in general accordance with ASME BPE. The unit also complies with the requirements of the Pressure Equipment Directive (PED). The seal part is Compliant with: - FDA CFR Title 21. Paragraph 177. 1550.
5.2.2
8.2 1
- USP Class VI Biological Reactivity Cytotoxicity Testing In-Vitro <87> & In-Vivo <88> extracted at 121 °C for 1 hour. - ADI Free (Animal Derived Ingredients) for materials used, manufacturing processes involved in producing the part.
C ertification This product is available with the following certification: - EN 10204 3.1 material certificates (pressure containing parts) - EN 10204 3.1 material certificates (wetted parts, including element fill) subject to additional cost. - Typical Internal surface finish certificates. - Specific internal surface finish certificates available at point of order request, and may be subject to additional cost. - Certificate of compliance (trap & element fill) for FDA and ADI free. - TSE/BSE Free Statement. - Certificate of compliance EC1935:2004 Food Contact Materials. - Declaration of conformity BS EN ISO 14644-1:2015 Class 7 Clean Room. Note: All certification/inspection requirements must be stated at the time of order placement, and may be subject to additional cost.
Page 1 of 4
Powered by FlippingBook